Passenger information system

passenger information system (PIS or PIDS) is an automated system for supplying users with public transport information through the use of voice, voice or other media. Among the information provided by such systems, a distinction can be drawn between:

  • Static or schedule information , which changes only occasionally and is typically used for journey planning prior to departure.
  • Real time information , derived from automatic vehicle rental systems, which changes continuously as a result of real-world events and is typically used during the course of a journey. , But also incidents that affect service operations, platform changes, etc.).

Static information has been traditionally available in the form of road maps and timetables . However, it is also a good idea to make a decision on whether or not to make a decision.

Real time information, which recognizes the fact that the public transport services are not limited to the timetable. By providing real time information to travelers, they are better able to conduct their journey confidently, including taking steps in the event of delays. [1] This helps to encourage Greater use of public transport, [2] [3] qui For Many countries is a political goal.

Real-time information is provided to passengers in a number of different ways, including mobile phone applications , platform-level signage, and automated public address systems . [4] It may include both predictions about arrival and departure times, as well as information about the nature and causes of disruptions.

Issues with passenger information provision

There are four main considerations for the provision of passenger information (static or real time):

  • Data available. Information can only be provided where it is available, and collecting information can be intensive resource. Also, there may be difficulties with coordinating data sharing between multiple organizations.
  • Data accuracy. Collecting information is error-prone. Also, prediction algorithms are not perfect, and real-time announcements may be in error for this reason.
  • Getting information to the passenger. A variety of dissemination mechanisms may be used, but it is not always easy to ensure that the correct information reaches the passenger when it is most needed. Information overload must be avoided.
  • Latency or Response time . Information provision must be promptly made to a passenger request or a real-world update. There is little point in announcing a service three minutes after it has departed.

Real-time arrival prediction systems

Bilingual real-time information is Provided there every platform in the MTR passenger railway system in Hong Kong
LED information display at Joanic station on the Barcelona Metro . These LED displays count down to the last second the time needed for a train to arrive at a station
LCD display display used on the Kaohsiung MRT

Current operational information service is running on the file Managed from automatic vehicle location (AVL) systems and from control systems, Including incident capture systems . This information can be compared algorithmically with the published service timetable to generate a prediction of how services will run in the next few minutes to hours. This may be affected by additional information: for instance, bus services will be affected by congestion on the road network, while all services may be affected by adverse weather conditions.

Economic rationale

The capital and revenue costs for traveller information systems can be calculated with reasonable accuracy. However, the derivation of tangible financial benefits is far more difficult to establish and as a consequence, there is very little research. This directs the business model for information systems towards the “softer” merits such as traveller confidence etc. It is worth noting that there must be an actual value as individuals are willing to pay for systems that give them access to real time data relating to their journey. The difficulty is establishing what this is for each individual person and perhaps each individual piece of roadside hardware.

Communication channels

Information may be delivered via any electronic media, including:

  • Mobile phone application
  • LED displays and screens inside stations
  • Internet through a website
  • telephone (either a manned bureau service or an automated answering system)
  • touch screen kiosks for self-service (e.g. in customer offices)

Additional considerations include:

  • How the system will present information for disabled travellers
  • Whether the system will be able to provide information in multiple languages


Information display in a shelter at a TriMet bus stop in downtown Portland, Oregon

The information provided by a passenger information system depends on its location, and the technical scope (e.g. how big the display screen is)

At a station or stop, it is normal to provide up to date predictions of:

  • Which service is operated by the next vehicle to arrive, including its route and destination.
  • When this vehicle will arrive
  • How closely it is running to timetable.
  • Similar information for the following few services.
  • General advice on current travel disruptions that may be useful to the passenger in understanding the implications for their travel plans.

On a vehicle, it is normal to provide up to date predictions of:

  • When the vehicle will arrive at the next station or stop (express or long-distance services)
  • Advice on connecting services.

Personalised channels (web, mobile device, or kiosk) will normally be set up to mimic the view from a station or stop but may in addition be linked to journey planners. Using such systems a passenger may (re)plan their journey to take into account current circumstances (such as cancelled services or excessive delays).



In Paris, France, SIEL indicator systems (abbreviated from Système d’information en ligne) are installed in the RER, the Paris Métro and on 250 bus routes on the RATP bus system.

On the RER, there are 2 types of indicators used, the first generation model which only indicates the termini of trains stopping at a station through the use of square lights located beside the words bearing the name of a terminus, and the second generation model which includes an LED display above the square lights indicating the terminus and train service. These displays are only used on the RER line A, RER line B and at Gare de Châtelet – Les Hallesstation on RER line D, and can be inaccurate at times due to the lack of communication between SNCF and RATP, the two operators of the RER.

On the Paris Métro, there are two types of information display systems; the LED numerical display installed in all Métro lines (except line 14), in use since 1997, and the television display installed on all stations on line 14. These displays show the time needed for a train (and the subsequent train after it) to reach a particular station.

On the bus network in Paris, monochrome LCDs have been used since 1996 to indicate the time needed for a bus on a bus route to arrive at a bus stop, after a two-year trial period on a few bus routes.

  •  1st generation termini indicator on the RER line A
  •  2nd generation termini indicator on the RER line B
  •  LED indicator on the Paris Métro
  •  A variant of the Métro’s LED indicator used on Paris Métro Line 13utilizing a lighted arrow indicating the terminus of the next train
  •  TV screen used on Paris Métro Line 14
  •  LCD used on Paris’s bus system


Stadtbahn passenger information display in Düsseldorf’s new station at Heinrich-Heine-Allee with greeting message „welcome to the new network…“

Deutsche Bahn AG offers a Travel Information System (RIS). This shows current train times compared to the published timetable, as well as known delays and expected arrival and departure times of the trains. This information is made available to the train conductor (via SMS) as well as to the passenger via loudspeaker in the train station or schedule boards on the internet.[5] The VRR[6] and VRS[7] transportation schedule information systems also process RIS data. The data can also be queried in real-time via mobile devices like mobile phones.

The RIS system was started in 2003 and by 2007 it was planned to have 30,000 trains equipped with the necessary train describer (electronic train number).[8] In an accompanying program the older flap-display information displays were replaced by electronic dot-matrix signage. While large stations have platform displays with multiple rows the Deutsche Bahn network operator developed the DSA standard system for smaller stations with single row. In 2011 a federal funding was granted to equip 4500 additional stations with DSA signage (Dynamischer Schriftanzeiger). That makes for the majority of the 6500 DSAs by 2015.

DSA passenger information system

The federal grant came along with the EBA railway authority’s order in 2010 to have all stations get connected to the travel information system to announce delays with an electronic signage or loudspeakers. The Deutsche Bahn operator tried to proceed legally against that order for stations with very low frequency but she lost all lawsuits in 2015.[9] It was given 18 months to equip the remaining stations which was done with DSAs. The DSA system has a GSM radio module to receive a text message to be displayed in a horizontally moving news ticker style. When there’s no delay the current time is shown statically on its 96×8 LED dot-matrix display. A loudspeaker may optionally be mounted on top.

United Kingdom

This section needs to be updated. Please update this article to reflect recent events or newly available information. (May 2017)

National Rail stations are equipped with visual platform displays and audio announcements which indicate the next service or services from the platform, and which warn passengers to stand clear of trains which are not scheduled to stop, which are not in use, or which are about to depart. Additionally, concourses and ticket offices have large screen displays which show all of the services available at the station for the next hour or more, and (at major stations) the full route of the service and any restrictions applicable (e.g. ticket types, catering services, bicycle carriage). It should be noted that many smaller and less well-used railway stations do not have such systems, but rather have “passenger help points” which connect the user by telephone to a control room by pushing an “Information” button.

This[ambiguous] information is available online at National Rail[10] and on mobile devices.

Most London Underground stations have “countdown” displays on each platform. These are simpler than the national rail displays as in most cases each platform serves only a single line and there are little to no variations in carriage restrictions and destinations served. Audio announcements are also made regularly.

Local authorities and some transport operators provide electronic versions of the bus timetables to the Traveline[11] information service which covers all public transport modes, and from there to other information services such as Transport Direct,[12] and Google Transit.[13][citation needed]

The deployment of real-time bus information systems is a gradual process which currently extends to around half of the national fleet and a high proportion of town-centre stops, but relatively few suburban and rural locations. The first use of these systems was in Brighton and Hove[citation needed]. The Traveline NextBuses[14] information service provides the next departures from any bus stop in the UK, and some trams as well. This information is real-time where the real-time feed has been connected in, otherwise the scheduled times are given.

The Government-sponsored Transport Direct project provides journey planning across all transport modes (including private car) and is increasingly linked to real-time information systems.[citation needed]

United States

A PIDS at the Gallery Place–Chinatown station of the Washington Metro
This section needs to be updated. Please update this article to reflect recent events or newly available information. (May 2017)
A PIDS at the Lorimer Street station of the New York City Subway

Real time passenger information was brought to riders in the US by NextBus corporation, a small startup, in 1999[citation needed]. The first systems were installed in Emeryville, California, and later in San Francisco, California[citation needed]. As of 2012 both initial systems are still in operation.

The Washington Metro installed a PIDS in all of its stations in 2000. The system provides real-time information on next train arrivals, delayed trains, emergency announcements, and related information.[15] Metro also provides current train and related information to customers with conventional web browsers, as well as users of smartphones and other mobile devices.[16] In 2010, Metro began sharing its PIDS data with outside software developers, for use in creating additional real-time applications for mobile devices. Free apps are available to the public on major mobile device software platforms (iPhone/iPad, Android, Windows Phone, Palm).[17][18] The system also began providing real-time train information by phone in 2010.[19]

The New York City Subway began installing its public address/customer information screens, commonly known as “countdown clocks”, in its stations in 2007. In 2012, the system began offering SubTime, a website and iPhone app for real-time train arrival estimates for several of its subway services,[20] and the arrival data are shared with outside software developers to support creation of additional apps.[21] There are also PIDS installed on some MTA Regional Bus Operations routes over the years, but mostly, the MTA offers real-time bus tracking through another website/app called BusTime.[22]

Amtrak has deployed PIDS throughout the Northeast Corridor. Boston MBTA and MBCR have also deployed PIDS.

As of 2010, PIDS are being deployed with unified messaging, which can include information streamed to mobile devices, phones and translated directly to voice announcements. Text to Speech products have been designed to convert PIDS data to speech in a choice of over 20 languages.

See also

  • CEN Transmodel, IFOPT and SIRI: technical specifications and standards
  • Real Time Information Group
  • Transmodel, CEN European Reference Data Model
  • Real Time Information Group (RTIG), UK organisation
  • Identification of Fixed Objects in Public Transport (IFOPT)
  • Service Interface for Real Time Information (SIRI)
  • Intermodal journey planner
  • IEEE Intelligent Transportation Systems Society
  • General Transit Feed Specification


  1. Jump up^ Ferris, Brian; Watkins, Kari; Borning, Alan (2010-01-01). “OneBusAway: Results from Providing Real-time Arrival Information for Public Transit”. Proceedings of the SIGCHI Conference on Human Factors in Computing Systems. CHI ’10. New York, NY, USA: ACM: 1807–1816. ISBN 9781605589299. doi:10.1145/1753326.1753597.
  2. Jump up^ Brakewood, Candace; Macfarlane, Gregory S.; Watkins, Kari (2015-04-01). “The impact of real-time information on bus ridership in New York City”. Transportation Research Part C: Emerging Technologies. 53: 59–75. doi:10.1016/j.trc.2015.01.021.
  3. Jump up^ Tang, Lei; Thakuriah, Piyushimita (Vonu) (2012-06-01). “Ridership effects of real-time bus information system: A case study in the City of Chicago”. Transportation Research Part C: Emerging Technologies. 22: 146–161. doi:10.1016/j.trc.2012.01.001.
  4. Jump up^ Schweiger, Carol L.; Program, Transit Cooperative Research (2003-01-01). Real-time Bus Arrival Information Systems. Transportation Research Board. ISBN 9780309069656.
  5. Jump up^ “DB BAHN – Abfahrt und Ankunft”. Retrieved 2014-06-28.
  6. Jump up^ “Verkehrsverbund Rhein-Ruhr – Fahrten planen”. Retrieved 2014-06-28.
  7. Jump up^
  8. Jump up^ “Schneller wissen, was los ist”. Der Spiegel. 2003-04-10.
  9. Jump up^ “Deutsche Bahn muss an Haltestellen über Verspätungen informieren”. Die Zeit. 2015-09-09.
  10. Jump up^ “”. Retrieved 2014-06-28.
  11. Jump up^ “”. Retrieved 2014-06-28.
  12. Jump up^ “”. Retrieved 2014-06-28.
  13. Jump up^ “Transit – Google Maps”. Retrieved 2014-06-28.
  14. Jump up^ “Traveline – mobile phone services”. Retrieved 2014-06-28.
  15. Jump up^ Washington Metropolitan Area Transit Authority (WMATA) (2004-03-26). “Metro offers enhancements for the passenger information display monitors.” News release.
  16. Jump up^ WMATA. “Mobile Services.” Accessed 2012-11-19.
  17. Jump up^ WMATA (2010-08-06). “Metro invites software developers to discuss new transit data feed.” News release.
  18. Jump up^ WMATA. “Developer Resources.” Accessed 2012-11-19.
  19. Jump up^ WMATA (2010-08-31). “Real-time next train arrival information now available by phone.” News release.
  20. Jump up^
  21. Jump up^ Metropolitan Transportation Authority, New York (2014-01-13). “MTA Adds Real-Time Arrival Estimates on L Line.” MTA News.
  22. Jump up^

Leave a Comment

Your email address will not be published. Required fields are marked *